.png)
About the Product
Wood Grain Filler fills open grains and pores leaving an absolutely clear, glass-smooth surface, ready to topcoat. Drys fast, sands easily, and is also stainable.
Features
Flawless Finish – By filling wood grain before top coating, eliminate distracting pockmarks and achieve a silky, glass-smooth finish that enhances the overall aesthetic of your project.
Use Less – You no longer have to apply layer after layer of top coat to get a clear, smooth finish. With wood grain filler, as little as one coat is enough to fill any imperfections, letting you apply less top coat at the end.
Easy Application – Simply rub in and trowel off the excess to effortlessly fill wood grain pores, leveling the surface for a professional-quality finish in as little as one coat.
Total Customization – Apply the filler over stain, sand it, or even tint it with water soluble dyes or just a dab of latex paint colorant, offering you a personalized end result.
Safe for You – Our water-based formula is epoxy free, low odor, and super low-VOC. You can breathe easy while using this product in your house and around your family and pets.
Instructions
Environment: For best results, work in an environment between 68-75ºF.
(Optional): Apply your CrystaLac sealer, depending on your desired end result. If using color, add your color before applying Wood Grain Filler to ensure equal color distribution.
Preparation: Begin with a properly sanded surface, free of sanding dust.
Application: Apply Wood Grain Filler with either a lint free rag, a brush, or even your fingers to feel for inconsistencies. Then, trowel off any excess.
Dry Time: Allow to thoroughly dry; about 2-4 hours. We recommend 6-8 hours prior to sanding. Wood Grain Filler will dry milky, but will clear when topcoated.
Recoat Time: Depending on the openness of the grain, your project may take more than one coat.
Finish: Sand smooth and remove any sanding dust with a vacuum or compressed air. Wipe with a damp cloth (water only) and reapply as needed. Do a final sanding before applying your choice of a CrystaLac topcoat.
Note: If using Wood Grain Filler with products from other manufacturers, be sure to test the compatibility before applying to your project.